 |
 |
 |
| Walter's
2003 New Beetle Convertible |
|
|
 |
 |
 |
| The car was
delivered from the dealer and the modifications immediately began. |
Not happy
with an Eibach prokit a set of KW V1's were installed to get the stance
ride just the way it should be. |
Coilovers
installed and set at a 2" drop. |
 |
 |
 |
| Rear KW setup. |
Getting the
car ready to test fit the ABD Racing cup bumper. |
ATS Side
skirts test fitted. |
 |
 |
 |
| Cup bumper
test fitted and ready for paint. |
Bumper and
fenders back from the paint booth and ready to be installed. |
|
 |
 |
 |
| A Euro badge
installed on an 03 convertible is not a an easy task, modification was required. |
A set of
Euro tails were installed, to set off the back end. |
A Magnaflow
catback installed to free up a few extra ponies. |
 |
 |
 |
| A gauge package
was selected from Auotmeter. The gauges are Ultra-lites, and notice the
Anwalt temp adapter is required to install a temp gauge on these cars. |
Dressed up
the interior with a bit of paint on the trim pieces and the speedo cover. |
As the car
is so low we fabricated one of our skid plates to protect the oil pan. |
 |
 |
 |
| We painted
up the calipers and installed a set of TSW Trophy's |
|
For 2006
we are set to run a set of 19" wheels and tires. The tires selected
were Hankook Ventus V4ES H105's in 225/35WR19 |
 |
 |
 |
| The wheels
selected were the Privat Farhen. The steel gray centers should look right
at home on a silver car. |
In the box
resides a Carbon fibre hood |
Removal of
the factory hood, awaiting the carbon fibre hood. |
 |
 |
 |
| Carbon hood
installed and adjusted. Awaiting the emblem install. |
Caractere
rear valance installed, work begins on the custom exhaust. |
New tip and
exhaust system finished and installed. All components eve the tips are fabricated
in house. |
 |
 |
|
| We have decided
to try the D-Pic performance meter from Autometer, in our current gauge
pod. The gauge allows one to test 1/4 mile, 0-60 times, breaking distances,
lateral G's, and even horsepower. |
The bumper
valance and fenders have been sent off to paint. Please check back often
for the finished car. |
Caractere
rear valance installed, Anwalt custom dual round functional exhaust set
installed. |
 |
 |
 |
| Carbon fibre
hood, new 19X8.5" Privat Farhen's install. |
Notice the
stance. |
On display
at the Street Freaks Three Hills Show and Shine 2006. |
| |
 |
|
|
In highway
trim. |
|
|
